In accordance with the Man Roland specifications, we have had all tests successfully completed and include copies of these along with confirmation from the suppliers of the 'corrosion inhibitor' as requested. 

'62C' was successfully tested without the 'Parabar Corrosion Inhibitor Additive' to prove the product in a 'worst case scenario'.  As you will see from the test report, the product is stated as being NON-CORROSIVE when tested on nickel plated and plain steel at elevated temperatures over an extended period of time.

'62C' Safety Blanket Wash DOES NOT CONTAIN any of the following prohibited chemical agents:

Chromic Acid                            (of any kind)

Acetic Acid

Phosphoric Acid                        (of any kind)

Poly Phosphatic Acid

Nitric Acid                                 (of any kind)

Sulphuric Acid                           (of any kind)

Hydrochloric Acid                       (of any kind)

Hydrogen Peroxide         

Citric Acid                                  (concentrate)

Chlorinated Hydrocarbons

PRINTING BLANKETS

'62C' has been tested by Day International on their 'Dayco' range of printing blankets and will not cause swelling, delamination, hardness change etc.

W.R. Grace also independently tested 62C types 1 & 2, as well as material from the News Ltd.  'Renzmann' distillation unit in South Australia, and their report follows.

KATEC AFTER-BURNER

'62C' has been approved for use through the Katec After-burner unit, approval sheet attached for your reference.

PRINTING ROLLERS

'62C' has been swell tested and approved by the following roller manufacturers for use on their rollers; Art Rollers (Qld), Art Rollers (NSW), Brissett Rollers.